Browsed by
Category: Uutiset

Yleiselektroniikka donates components

Yleiselektroniikka donates components

Ara and ExTechOp picking up the boxes in Espoo

Helsinki Hacklab received a donation from Yleiselektroniikka. Two car loads of boxes are being sorted and placed in their new places right now in the lab.

We like to thank Yleiselektroniikka for supporting us!

Toistaiseksi voimassa olevat ohjeet läbin käytöstä

Toistaiseksi voimassa olevat ohjeet läbin käytöstä

Kaupungin aikaisemmat rajoitukset on ilmoitettu jatkuvan nyt aikavälillä 30.11.2020–10.1.2021. Seuraavat ohjeet ovat kuitenkin voimassa toistaiseksi näistä aikarajoista riippumatta.

Seuraavat ohjeet koskevat avainjäseniä ja ovat voimassa toistaiseksi:

Edellisestä ohjeistuksesta poiketen, henkilökohtaisia projekteja on nyt mahdollista tehdä, mutta läbillä käytettävä aika on syytä minimoida. Työtilan infraan, työvälineisiin ym. liittyvät kehittämiset ovat edelleen suositeltavimipia. Omia tavaroitaan saa myös noutaa.

Kaikki vierailut on ilmoitettava etukäteen #lockdown-kanavalla Slackissa. Suosittelemme myös kertomaan, mitä olet aikeissa tehdä, jotta esimerkiksi vältymme ruuhkalta ja turhalta odottelulta laserhuoneen käytössä. Arvioi ilmoitettujen käyntien mukaan, onko tilassa turvallinen määrä henkilöitä vai ei. Ilmoittamalla vierailusi kanavalla pystymme myös tarvittaessa jäljittämään mahdollisia altistumisia. Läbin osittainen auki pitäminen perustuu kanavan käyttämiseen, ja järjestelyyn osallistuminen ratkaisee, voidaanko tällä varotoimella pärjätä vai joudutaanko linjauksia tiukentamaan.

Ryhmätyöskentely ja muut keskenään sovitut tapaamiset eivät ole sallittuja, mutta harkintaa voi käyttää esim. samassa taloudessa asuvien henkilöiden kesken.

Tiloissa tulee käyttää nenän ja suun peittävää maskia. Vältä ruuhka-aikoja ja työskentele hiljaisina hetkinä aina kun mahdollista.

Toistaiseksi avainjäsenet eivät saa tuoda tiloihin muita henkilöitä.

Perusjäseniä koskevat ohjeet:

Avoimia tiistai-iltoja tai muita tapahtumia ei järjestetä toistaiseksi. Pyritään järjestämään toimintaa etänä Slackissa ja muilla tavoin, seuraa keskustelua, ehdota ideoita ja osallistu vapaaehtoisena.

Hacklab suljettu 30.11.–20.12.2020

Hacklab suljettu 30.11.–20.12.2020

Helsinki Hacklab ry:n hallitus noudattaa kaupungin viimeisintä ohjeistusta ja sulkee yhdistyksen tilat viranomaisten suosittelemaksi ajaksi 30.11. – 20.12.2020, eli alkaen maanantaista. Tällä aikavälillä ei ole mahdollista tehdä henkilökohtaisia projekteja labilla. Avainjäsenillä on rajoitettu pääsy työtilaan, mikäli tähän on tarve. Suosittelemme FFP2-tason maskin käyttämistä, jos olet paikalla lyhyttä vierailua pidempään.

Jos käyt labilla sulkemisen aikana, ilmoita siitä Slackissa/Matrixissa kanavalla #lockdown.

Yhdistyksen syyskokous järjestetään kokonaan etänä 5.12. klo 14. Osallistumisen ohjeet jaetaan lähempänä kokouksen ajankohtaa. Avainjäsenhaastatteluja järjestetään seruaavan kerran vuoden vaihteen jälkeen. Ilmoitamme jatkosta ennen 20.12. viranomaisten ohjeiden perusteella.


Hacklab closed from November 30 to December 20

The board of Helsinki Hacklab ry follows the latest guidelines of the city authorities and closes the association’s premises for the period recommended by the authorities from 30 November to 20 December 2020. During this time, it is not possible to do personal projects in the lab. Key members have a limited possility to visit the workspace, if there is a need. Use a nose and mouth covering mask if you move indoors. We recommend using an FFP2-level mask if your visit lasts longer.

If you visit the lab during shutdown, report it on Slack/Matrix channel #lockdown.

The autumn meeting of the association will be held completely remotely on 5 of December at 2 p.m. Instructions for participation will be announced closer to the time of the meeting. Key member interviews will be held next time after the turn of the year.We will announce more information before 20.12. based on the instructions of the authorities.

Käytännön toimintaohjeita poikkeusaikana

Käytännön toimintaohjeita poikkeusaikana

Yhdistykseltä on kysytty paljon viime aikoina erityisesti uusien jäsenten ja perusjäsenten tilankäytöstä. Käytäntöjä ei ole määritelty erityisen tarkkaan ja joudumme myös seuraamaan mahdollista muuttuvaa tilannetta ja reagoimaan sen mukaisesti. Tässä joitain kesän ja syksyn aikana vakiintuneita toimintatapoja, joita olemme pyrkineet noudattamaan:

  • Avoimet tiistai-illat ja muut säännölliset tapahtumat ovat peruttu.
  • Perusjäsenet ilman omaa avainta joutuvat järjestämään pääsyn tilaan sopimalla asiasta jonkun avainjäsenen kanssa. Parhaiten tämä onnistuu kyselemällä etukäteen Slackissa tai soittamalla läbin puhelimeen. Avainjäsenen ei ole pakko päästää ketään sisään, jos hänellä ei esimerkiksi ole siihen mahollisuutta kiireiden tms. syiden vuoksi. Pääsy työtilaan ei onnistu lähettämällä sähköpostia hallitukselle.
  • Suosittelemme käyttämään läbiä vain projektien tekemiseen ja työtilan ylläpitoon, ei yleiseen pitkäaikaiseen oleskeluun.
  • Uusien avainjäsenten hyväksymisessä pyydämme ottamaan ennakkoon selvää mahdollisimman paljon kaikesta nettisivuilla ja wikissä löytyvistä tiedoista, nyt kun emme voi tavalliseen tapaan edellyttää aiempaa näyttöä jäsenaktiivisuudesta avaimen myöntämisessä. Emme toivo että avainta haetaan hetken mielijohteesta poikkeusaikojen pakottavan tarpeen vuoksi lyhyelle aikavälille. Tule haastatteluun vasta kun olet lukenut yleisiä ohjeita avainjäsenyydestä, tavaroiden säilytyksestä ja wikin työtilan kuvauksesta. Kirjoitetun ohjeistuksen ymmärtäminen ja ohjeiden etsiminen on avainjäsenelle edellytettävän tärkeää, ja tätä arvioidaan myös haastattelussa.

Yksinkertaisissa kysymyksissä pyydämme esittämään kysymykset jäsenistölle Slackissa ja lähettämään hallitukselle kyselyjä vain jäsenyyteen, raha-asioihin ym. aiheisiin liittyen.

 

We have received many questions about how to use the space lately. We don’t have a complete list of instructions, but here are some practices we have applied so far during the exceptional opening hours:

  • Open Tuesdays etc. are canceled.
  • Basic members without their own key, have to arrange themselves in the lab accompanied by a key member. Best way to do this is to ask beforehand using Slack or calling our telephone. There is no possibility to arrange an appointment by email.
  • We recommend to use the lab for projects and maintenance only, not spending time in general.
  • New key member applicants have to be better prepared for the interview than usual, now that we cannot help them getting to know the place in the usual way. We hope the applicant has read most of the information available on our website and wiki. We assess in the interview how the applicant has done their research.

Simple questions concerning are asked to be directed in Slack channels and not hallitus/board email. You are welcome to send email concerning about memberships, fees etc.

Syyskokous 2020-12-05

Syyskokous 2020-12-05

Tervetuloa syyskokoukseen 2020-12-05 klo 14.

Tapahtuma järjestetään pääosin etänä ja tällä kertaa ei pidetä samassa yhteydessä pikkujouluja.

Kokouksen asialista

  1. kokouksen avaus
  2. valitaan kokouksen puheenjohtaja, sihteeri, kaksi pöytäkirjantarkastajaa ja tarvittaessa kaksi ääntenlaskijaa
  3. todetaan kokouksen laillisuus ja päätösvaltaisuus
  4. hyväksytään kokouksen työjärjestys
  5. vahvistetaan toimintasuunnitelma, tulo- ja menoarvio sekä liittymis- ja jäsenmaksujen suuruudet seuraavalle kalenterivuodelle
  6. valitaan hallituksen puheenjohtaja ja muut jäsenet
  7. valitaan yksi tai kaksi toiminnantarkastajaa ja heille varatoiminnantarkastajat
  8. käsitellään muut kokouskutsussa mainitut asiat: (tällä hetkellä ei tiedossa olevia muita asioita)

The second annual general meeting will be held in Finnish on 2020-12-05 starting at 2pm

The event is arranged mostly online. This time we don’t have a pre christmas party.

Meeting agenda can be found in charpter 11. in Rules of the organisation.

Avoimet tiistait tauolla koronatilanteen takia / Open tuesdays on hold due to corona situation

Avoimet tiistait tauolla koronatilanteen takia / Open tuesdays on hold due to corona situation

Pahentuvan koronatilanteen takia Helsinki Hacklab on päättänyt perua avoimet tiistait ja yleiset koulutukset toistaiseksi. Avainjäsenet voivat jatkaa työskentelyä tiloissa omalla avaimellaan. Suosittelemme kuitenkin myös avainjäsenten käyttävän tiloja vain työhön tarvittavan ajan ja tekemään esimerkiksi datailun ja ajanvieton turvallisesti kotona. Jäseniä kannustetaan kuitenkin tekemään kaikkea labin ylläpitoa niin paljon kuin he haluavat. Huolehdithan myös tilojen siisteydestä tavallistakin paremmin.

Yhdistyksen hallitus seuraa viranomaisten ohjeita ja palaa asiaan tilanteen muuttuessa.

Due to worsening corona situation, Helsinki Hacklab has chosen to cancel all open tuesdays and courses for the time being. Key members can continue working at the lab with their own key. We recommend even key members to use the lab for only the time necessary for your task and doing for example programming and general hanging out safely at home. All work for maintaining the lab is encouraged and can be done as much as you like. Remember to keep the lab clean, even more so than normally.

The board follows the instructions of the authorities and will send updates when the situation changes.

End of summer update and important traffic route information

End of summer update and important traffic route information

Image: https://raidejokeri.info/

Important: car traffic route changes leading to Hacklab

Starting from this week, Takkatie road to Helsinki Hacklab is temporarily closed from east and car users now have to arrive from Ravitie past Vermo hippodrome. The road work lasts for three months because of the new tram line construction. The tram starts its operation in 2024 and the closest stop will be 550 meters from our door in direction of Vermo. The closed crossing is marked with a red square in the picture.

End of summer opening times

We cannot promise normal weekly operations as for now, and there are no courses planned, only short indroductory trainings for tools occasionaly. Open Tuesdays are going on somewhat normally, but please refrain from visiting the place if you just plan to hang around without any projects etc., or in case you have been traveling or exposed to the virus in some risk location.

Now that much of the making and doing stays home, our online community is more important than ever. If you are a member and have not yet joined our Slack group, you can request a new join link from hallitus email.

New upstairs doors

This weekend we changed the first of two new doors in our upstairs expansion area. The goal is to connect them in our electronic lock system soon. The insides have also been improved with new paint on the walls. Doors had to be ordered in special measurements because of the low available installation height and odd widths.

There is also an ongoing work with the chemistry room. The fume cabinet is fitted with a blower that sends the air out. Similar work has been done also for the laser cutter, and it works with manual on/off for now.

 

Open Tuesdays continue with limitations

Open Tuesdays continue with limitations

Helsinki Hacklab continues Open Tuesdays. The government has set a limit of 50 persons for meetings, and the space is not very big for crowds. If situation or experiences from these Tuesdays show that we need to have additional limitations, we might set such during the evening or beforehand. Key members are advised to use the space on other days if possible.

Please note that the woodworking room and its machines are not in use due to installations in progress. Laser, electronics and metal working rooms are available as usual.

Some bigger and smaller progress in the space:

  • storage for woodworking is getting improved
  • upstairs doors will be changed
  • the back yard is more clean and usable than ever
  • we are taking the shipping container in use but it needs some work first
Spring meeting and a new table saw

Spring meeting and a new table saw

Exceptions continue in the workspace

Open Tuesdays are still not scheduled yet and the association follows national recommendations when deciding possible opening or further exceptions. Key members are adviced to use the space for improving the hackerspace and making personal projects at home if possible, thus keeping the number of people at the lab in minimum.

Spring meeting

This year’s spring meeting is held online on Sunday 2020-05-17 at 16.00. The agenda by rule is:

1. the opening of the meeting
2. choosing a chairperson, a secretary, two inspectors of the proceedings and when needed, two vote counters
3. the legality and decision-making power of the meeting are stated
4. the procedures of the meeting are accepted
5. the financial report, the annual report and the statement of the auditors are presented
6. the ratification of the financial report and freedom of responsibility for the board and other responsible persons are decided
7. other topics mentioned in the call for meeting are discussed

We will announce our members later how to participate in the meeting.

The changes in rules of the organisation we made in last fall meeting, have now been processed and accepted by the registry, and are in effect from now on.

New table saw

The new table saw we member funded has arrived today! The machine requires new training and a permit before use, even for those who have used the old one. This saw replaces the previous with more powerful motor and more solid, larger frame.

Exceptions in Open Tuesdays and table saw funding

Exceptions in Open Tuesdays and table saw funding

UPDATE 2020-04-17 We cannot yet make any promises when we will return to normal schedule. Open Tuesdays are at the moment still cancelled. The Arduino course has changed to online course only. We try to keep the calendar updated, but questions are answered in Slack/IRC/Telegram too.

We recommend that key members try to make only small and quick jobs for their projects and not spending long periods in the workspace so that there are as few people as possible same time (for example workday out of office is discouraged). All work for lab infrastructure and improvements plus social projects are welcomed even if they’re time consuming.

 


Helsinki Hacklab cancels all open Tuesdays and postpones the Arduino course until 2020-04-15, so the next Open Tuesday will be 2020-04-21 unless situation changes. The ARM/C course second meeting will be scheduled normally. We will keep the calendar updated for any changes. The exceptions only affect open events, so key members can use the place as usual.

If you have time and want to get the upstairs level more ready for use, you are very welcome to help us improving the new expansion. The lab is ordering new doors for upstairs expansion and we are planning to install electronic locks just like downstairs, but this will take some time as the doors have to be custom made because of odd dimensions.

Any changes and further exceptions can be found in the calendar.

New table saw

We are arranging a member collection for a table saw to replace the old one. If you’re a member and want to help us, you can support the project in our webstore.